ホーム

BUFFALO

お問合せ

よくあるご質問(FAQ)

  • [アンサーID: 15005]

TeraStation - Replacement Hard Drive

  • 公開 2013年5月20日 12時4分
  • 更新 2013年11月7日 10時46分

TeraStation - Replacement Hard Drive

 

Note: LinkStation Quad 6 TB & TeraStation ES, III and III iSCSI 6 TB models (specifically: LS-Q6.0TL/R5, TS-XE6.0TL/R5, TS-X6.0TL/R5, TS-RX6.0TL/R5 and TS-RIX6.0TL/R5) use 1.5 TB hard drives and should use OP-HD1.5T as the replacement drive. For all other capacities and models, please refer to the chart above and then select the appropriate capacity.

 

* Some TeraStation devices were originally supplied with 512 or 4K drives depending on when they were produced. It is recommended to replace drives with the same sector size to maintain proper performance. If the TeraStation currently has 512-byte sector hard drives, then OP-HD512-3Y replacement drives should be used. If the system has 4K sector drives installed, then OP-HD4K-3Y should be used. Mixing sector size hard drives inside the same array can lead to reduced RAID performance and is not recommended. Specifically for TeraStation Pro WSS units, mixing sector sizes is not supported and RAID arrays cannot be rebuilt using mixed drives.
  • このよくある質問は役に立ちましたか?

表示 : スマートフォンPC

閉じる